Magnetic Equipment

‘Trimurti’ Permanent Drum Type Magnetic Separator is the most useful nonelectric separator for separating tramp iron from nonmagnetic material processed in bulk quantity for the purity of end products, recovery of metals having a commercial value, and protection of processing plant and machinery. These are widely used in all processing industries for the separation of iron contamination from minerals, chemicals, food, flour, plastics, grains, sand, cement, fertilizers, abrasives, glass slag, ores, rock, and many other products.

WORKING PRINCIPLE & MAGNETIC SYSTEM

The Permanent Magnetic Drum consists of a stationary permanent magnetic assembly having uniform and everlasting magnetic field across the entire width of the drum, which is effective over approximately half the drum circumference.

Drum shell made of non magnetic stainless steel revolves around the magnetic field. As the material fed evenly from the chute falls over the drum, powerful magnetic field attracts and holds ferrous particles to the revolving shell. As the revolving shell carries the iron particles through the stationary magnetic field the nonmagnetic material falls freely from the shell while ferrous particles are firmly held until carried beyond divider and out of the magnetic field. The strength of the permanent magnetic drum is guaranteed to be greater than the corresponding electromagnetic drum. The Permanent Magnets used are everlasting magnets and their strength does not diminish during normal use.

Note: We reserve the right to make alteration in the machine from time to time as required.

These are used by most of the mineral manufacturers for getting total iron free material. Extra high power magnetic plate at the material outlet side can also be provided. Models are available in any drum size as per the requirements

SIZE RANGE

The permanent Drum Separators are available in standard drum diameters of 300 mm, 400 mm, and 450 mm. Drum length ranges from 300 mm to 1200 mm. Other sizes can be made as per the requirements. The larger diameter and length of the drum the greater is the volume of material that can be handled.

Permanent Magnetic Plates are used for the separation of tramp iron found in tea, tobacco, coffee, cocoa, milk powder, chemicals etc.

CONSTRUCTION AND WORKING

They are available in both flat and curved shapes and can be installed either above or along the passage of the flow of materials. They are provided with clamps and can be located on the conveyor of carrying such materials. Ideally, they are located 30 mm above the layer of material flow. These plates are constructed with high energy permanent magnets plated in a magnetic circuit. They are extensively used in CTS tea machinery and in biscuit stacking machines. They are available in various sizes as per the requirement.