Super 20 Oil Expeller

Trimurti oil machinery is being used in oil mills in India and may overseas countries for over 37 years. We have always offered expellers with latest features of efficient working and labor-saving devices. The latest demand of high capacity, high yield, and sturdy expellers being met with our offer of TRIMURTI SUPER 20 AUTOMATIC EXPELLER. SUPER 20 expeller is in a class by itself with its unique feature. Our experienced personnel in manufacturing and sales divisions have spared no effort to design this expeller to possess study built, easy installation, operation, smooth working and also satisfying the specific requirements of oil millers.

SUPER 20 possesses the following features.

CONSTRUCTION:

The sturdy close grain first grade cast iron frame is fitted on one piece fabricated oil tray. The frame is machined throughout in one selting to give perfect alignment of bearings, shafts and other parts. This reduces Static and Dynamic friction and saves greatly on power consumption

CHAMBER BOX:

it is vertically hinged and opens like a book and spares the trouble of removing it from expeller during a change of cage bars and worms. This is a great time and labor-saving improvement.

SUPER 20 Expeller is offered in two models :

SINGLE PRESS DOUBLE CHAMBER EXPELLER:

This model has two independent chamber 1st chamber length 22” X9” diameter and 2nd chamber is having a length of 27″X7″ diameter with a center body ring of 3″ width. This is a very high-pressure machine and leaves 6% to 7% oil in a cake in a single pressing

FIRST PRESSING SINGLE CHAMBER EXPELLER:

Having a length 52″X9″ diameter. This is used as a 1st pressing machine to feed other Expeller for 2nd pressing.

COOKING KETTLE:

The Expeller is fitted with a THREE STAGE cooking kettle. It is compact in design and is fitted with a self-controlled meal inlet to prevent overflowing. It is also fitted with a safety valve, pressure, gauge, steam traps, steam valve, and steam damping apparatus. The steam is welded and riveted and listed jackets to 100lbs. Pressure per square inch. The kettle requires 100-120 lbs. of process steam per hour at a pressure of 60 lbs. per square inch to be supplied from a separate boiler.

POWER:

The power required depends upon the material being crushed and how well it has been cooked. The normal requirement for usual seeds is 70-75 BHP

LUBRICATION:

The expeller is fitted with a self-lubricating reduction Gear Box. Main gears are steel fabricated and tempered, they also run in their own oil bath thus ensuring long life to all these gears. Stuffer lubricators are fitted on other bearings as standard fittings. High-pressure grease gun lubrication can be fitted if desired at an extra cost.

CAPACITY:

It varies from seed and also whether the expeller is being used for first or second crushing. The efficient cooking, preliminary crushing, and large capacity chamber box in thus expeller give the following crushing capacity of 24 hour working.

• Copra first crushing : 25 – 30 tons
• Copra second crushing : 20 – 22 tons
• Ground nut : 18 – 20 tons
• Cottonseed: 18 – 20 tons
• The oil left in the final cake is about 6-7%

MOTOR DRIVE ARRANGEMENT :

This expeller is usually supplied with a belt drive arrangement. If the motorized unit is desired, the same can be supplied at an extra cost.

DURABILITY :

All parts subject to heavy wear and tear such as worms cage bars cone points are made from case hardening steel (special alloy steel) and properly heat treated to give long life, high capacity, and low maintenance cost. Standard Equipment includes spanners, pressure gauges, steam traps, etc., etc. We reserve the right to alter the design and dimension without any prior notice at any time if the necessity arises.

Note: We reserve the right to make alterations to the machine from time to time as required.